How to knit a men's sweater with knitting needles?

What could be more romantic for a woman in the cold season than the image of a man in a warm knitted sweater nearby? Probably only the fact that this sweater is knitted for him by his own hands. Such a wonderful gift, such as a knitted sweater, will warm and give a feeling of comfort even to the most brutal young man, you only need to choose a model for the future sweater based on the preferences and tastes of the man, so that you will surely get to the point!

To begin with, it is worth considering several options for knitting men's sweaters. There are a lot of models, as well as methods for knitting sweaters, pullovers, jumpers. Here you need to know what a man will definitely like: braids, arana, embossed patterns, funny patterns with deer, or minimalism and severity in every line of a knitted thing.

We will study in more detail several possible options for knitting sweaters, so that it is easier to choose the most suitable. Beginning needlewomen will also be able to surprise loved ones with their skills, you only need to follow the schemes and descriptions exactly.

Men's knitting sweater - schemes with descriptions

If a needlewoman just recently started to master the art of knitting, but really wants to please a loved one with a pleasant and beautiful thing made by her own hands, this is no reason to take up small “projects”, such as knitting hats, scarves or vests. Knitting a sweater is quite within the reach of beginners, it is only important to choose a simple model to start with and carefully follow the instructions. Consider several options for knitting sweaters with knitting needles, which are suitable for both beginners and experienced knitters.

The simplest model for beginner needlewomen

First, try to knit a men's sweater with knitting needles with a wide elastic band. We get a casual option for everyday activities.

Sweater Sizes:

48/50 (52/54) 56/58

For work you will need:

• Yarn (100% sheep wool section dyeing; 100 m / 50 g) 650 (700) 750 g;
• Needles number 5;
• Circular knitting needles No. 5, length 50 cm.

The main pattern is knitted:

Alternately - 4 facial, 2 wrong.

Knitting density:

16 p. X 22 p. = 10 x 10 cm.

Working process:

Back

Draw 90 (96) 102 loops on the knitting needles and knit as follows: hem, 1 wrong side, 14 (15) 16 x 6 p. The main pattern, 1 wrong side, hem.

After 45 (46) 47 cm = 98 (100) 102 p. close from the initial row on both sides for armholes in 2 (3) 4 p., then in each 2nd p. 1 x 2 p. And 3 (4) 6 x 1 p. = 76 (80) 84 p.

At the height of the armhole 21 (22) 23 cm = 46 (48) 50 p. close to the shoulder bevel in every 2 r. 2 x 6 (7) 8 p.

Simultaneously with the first decrease for the shoulder bevel, close the middle 32 points for the neck, then knit both sides separately.

On the inner edge for further rounding close in every 2 r. 3 x 1 p., Then close the remaining 7 p.

Finish the other side in mirror image.

Before

Draw 90 (96) 102 loops on the knitting needles and knit as follows: hem, 1 wrong side, 14 (15) 16 x 6 p. The main pattern, 1 wrong side, hem. Then knit like a back, but with a deeper neck.

To do this, at the height of the armhole 17 cm = 38 p. close the middle 26 p., then knit both sides separately.

On the inner edge for rounding close in every 2 r. 6 x 1 p.

Shoulder bevel begin to be performed at the same height as on the back.

Finish the other side in mirror image.

Sleeves

Dial on the knitting needles for each sleeve 42 (48) 54 loops and knit as follows: hem, 2 wrong, 6 (7) 8 x 6 p. The main pattern, 2 wrong, hem.

For bevels add on both sides in each 6th r. 5 x 1 p., In each 8th p. 5 x 1 p. = 62 (68) 74 p. Increases on both sides should be included in the pattern.

After 47 (48) 49 cm = 104 (106) 108 p. from the initial row close for okat the sleeves on both sides of 2 (3) 4 p., then in each 2 r. 1 x 2 p., 4 x 1 p., 1 (2) 3 x 2 p., 2 x 3 p. And 2 x 4 p.

In the next row, close the remaining 14 p.

Assembly

Moisten parts, stretch acc. the sizes indicated in the pattern, chop on the pattern and leave until completely dry.

Perform shoulder seams.

On circular knitting needles, draw 74 (80) 86 p. Along the edge of the neck and knit with the main pattern 20 (21) 22 cm = 44 (46) 48 p., Close the loops freely.

Make side seams and sleeve seams, sew in sleeves.

Beautiful model with a pattern for men

The subject of knitted clothing is often associated with northern culture, since many methods of knitting came from countries with a predominantly cold climate. Knitted embossed patterns, motifs, arana and braids have always been incredibly popular not only when creating women's clothing, they are often chosen when knitting things for men and children. Therefore, you definitely need to learn how to knit a men's sweater with a pattern and try to create it yourself.Consider the scheme and description of knitting a rustic style sweater with embossed large patterns and a high collar.

Sweater Sizes:

S (M) L (XL)

For work you will need:

• Yarn (85% wool, 15% mohair; 50 g / 60 m) - 27 (28) 30 (31) skeins of white unpainted;
• Knitting needles number 4.5 and 5;
• Circular knitting needles No. 4.5, length 40 cm.

Product Width and Length:

• Chest - 108 (116) 124 (132) cm;
• 69 (70) 71 (72) cm.

Knitting density:

About 20 p. X 27 p. = 10 x 10 cm, knitted with a relief pattern with knitting needles No. 4,5 and 5. In order for the knitting density to correspond to the specified one, carry out fragments of the structural pattern according to the scheme on knitting needles of different thicknesses - No. 4,5 and 5.

If the instructions indicate only one number, then it applies to all sizes.

Knitting pattern:

Working process:

Back

On knitting needles 4,5, dial 108 (116) 124 (132) sts and knit with a relief pattern according to the pattern (1st row = out. Row).

When the length of the part is 44 cm, begin to form armholes. To do this, fix the mark in the middle of the back and close on both sides (at the beginning of each row) 3, 2, 1, 1, 1 p. = 92 (100) 108 (116) p.

When the height of the armhole from the mark is 23 (24) 25 (26) cm, start forming the neck: close the middle 18 (18) 22 (22) p. And finish both sides separately.

Then at the beginning of the next 2 p. close from the inner edge for rounding the neck in 3, 2 p.

At the same time, close the humeral bevel at the beginning of each row with 10, 11, 11 (12, 12, 12) 12, 13, 13 (14, 14, 14) loops from the outer edge.

Before

Knit like a back, but only with a deeper neck.

When until the end of the part it remains to tie the last 11 cm (check along the back to the last closed loops of the shoulder bevel), close the middle 8 (8) 10 (10) p. And finish both sides separately.

Close from the inner edge to round the neck at the beginning of each row: 3, 2, 2, 1, 1, 1 (3, 2, 2, 1, 1, 1) 3, 2, 2, 1, 1, 1, 1 ( 3, 2, 2, 1, 1, 1, 1) p.

Having tied to the first closed loops of the shoulder bevel (check on the back), close the loops in the same way.

Sleeves

On knitting needles No. 4,5, dial 52 (56) 60 (64) p. And knit with a relief pattern according to the pattern (1st row = out.
row).

Important: distribute the pattern on both sides of the middle, indicated by an arrow in the diagram.

When the part is 10 cm long, add 1 p. On both sides (after / before the edge loop). Repeat these increments in each 6th p., Including the added loops in the pattern, = on the needles 84 (88) 92 (96) p.

When the sleeve length is approximately 48 (49) 50 (51) cm, close for okat on both sides (at the beginning of each row): 2 times 2 points, 2 times 3 points, 2 times 4 points and 2 5 times. Then close the remaining loops.

Assembly

Sew parts on the front side with mattress and knitted seams = mattress - the longitudinal edges of the parts (= 1 r. X 1 r.), Knitted seam - the edges with closed loops.

Make side seams and sleeve seams. Sew sleeves, starting from the shoulder seam and the middle of the sleeve, sew down on both sides, then sew the sleeve into the armhole in the lower section.

Stand collar

On circular knitting needles No. 4,5, dial the loops from the front side, starting from the right shoulder seam: 1 p. From each closed loop along the edge of the back of the back + 5 p. Additionally at the beginning and end (distribute the loops evenly); 1 p.from each row down to the last 2 closed loops on the left side of the front; 1 p. from each closed loop; On the right side of the front loop, dial as on the left (the total number of loops should be a multiple of 4).

Knit in a circle: 1 p. purl, 1 p. facial, 1 p. purl and 1 p. facial.

Then continue to knit in a circle with an elastic band (= alternately 2 persons. And 2 out.), Until the collar is 16 cm high, and close the loops.

Knitting patterns with braids

Knitting a men's sweater with knitting needles is a special pleasure, because this thing will give warmth to an important person for you. Moreover, this thing can also become a real decoration of a man. For this, relief patterns in the form of braids, weaves and cones are more suitable for execution. Consider in detail how to knit a man's sweater with braids - a fashionable classic for all time.

Sweater Sizes:

48/50 (52/54) 56/58

For work you will need:

• Yarn (100% sheep wool; approx. 170 m / 100 g) approx. 800 (800) 900 g sulfur;
• Knitting needles number 4.5 and 5;
• Circular knitting needles No. 4.5, length 40 cm.

Patterns and schemes

Rubber: alternately 3 facial, 2 wrong.

Cross elastic: alternately 2 facial, 2 wrong.

Facial surface: front rows - front loops, wrong rows - wrong loops.

Patent Pattern (A)

Knit on 7 loops according to the pattern (= line A).

1st – 4th p. repeat 1 time, then the 3rd and 4th p. keep repeating.

Cones Pattern (B)

Knit on 11 loops according to the pattern (= line B). AT

1st – 6th p. keep repeating.

Pattern "Scythe" (C)

Knit on 24 loops according to the pattern (= line C).

1–26th p. tie 1 time, then 3–26th p. keep repeating.

Pattern rotation

Knit and distribute the loops according to the instructions.

Knitting pattern and description

Knitting density:

18 p. X 28 p. = approx. 10 x 10 cm, connected by facial smoothness;
25 p. X 28 p. = approx. 10 x 10 cm, connected by alternating pattern (density on average).

Working process:

Back

On knitting needles No. 4.5, dial 115 (125) 135 loops. For a belt, knit with an elastic band 17 p. (= 6 cm), while the 1st p. - Wrong, start with 3 facial. In the last r. add, evenly distributing, 13 p. = 128 (138) 148 p.

Then go to the knitting needles No. 5, distribute the loops as follows: hem, 0 (3) 6 p. Front stitch, 7 p. Patent pattern A, 3 (5) 7 p. Front stitch, 7 p. Patent pattern A, 9 p transverse elastic, 74 p. alternation of patterns between arrows a and b, 9 p. transverse elastic, 7 p. patent pattern A, 3 (5) 7 p. front stitch, 7 p. patent pattern A, 0 (3) 6 n. front stitch, edging.

After 33.5 (32) 30.5 cm = 94 (90) 86 p. close from the elastic band on both sides for the armholes 3 (4) 4 p., then in each 2 r. close 1 x 2 (3) 3 p., 3 (4) 5 x 2 p. and 2 (3) 4 x 1 p. = 102 (102) 106 p.

After 20 (21.5) 23 cm = 56 (60) 64 p. from the armhole, close on each side for a bevel of the shoulder 8 (8) 9 p., then in each 2nd p. close another 3 x 8 p.

Simultaneously with the 1st decrease for the shoulder bevel, close the middle 18 (18) 20 p. For the throat and first finish the left side.

On the inner edge for further rounding close in every 2 r. another 2 x 5 p.

Finish the other side in mirror image.

Before

Knit like a back, but for a deeper neck, already after 15.5 (17) 18.5 cm = 44 (48) 52 p. the height of the armhole close the middle 16 (16) 18 p. and first finish the left side.

On the inner edge for further rounding close in every 2 r. another 2 x 3 p., 1 x 2 p. and 3 x 1 p.

Shoulder bevels run as on the back.

Finish the other side in mirror image.

Sleeves

On knitting needles No. 4.5, dial 60 loops for each sleeve.

For the cuff, knit with an elastic band 17 p. (= 6 cm), while the 1st p. - Wrong, start with 3 facial. In the last r. add, evenly distributing, 8 p. = 68 p.

Go to the knitting needle number 5. Loops should be distributed as follows: edge, 5 p. Patent pattern A from arrow c, 9 p. Transverse elastic, 7 p. Patent pattern A, 24 p. “Spit” pattern C, 7 p. rubber band, 5 p. patent pattern A to the arrow d, edge.

For bevels through 3.5 cm = 10 p. from the cuff add 1 point on both sides, then in each 10th p. add 2 x 1 p. and in each 10 (8) 6th p. 7 (9) 11 x 1 st. = 88 (92) 96 st. Added loops after reaching the full patent pattern A (= 7 st.) Knit with the front stitch.

After 45 (43.5) 42 cm = 126 (122) 118 p. from the cuff, close for okata sleeves on both sides of 3 (4) 4 p., then in each 2 r. close 1 x 3 p., 4 (3) 3 x 2 p., 10 (12) 14 x 1 p., 2 x 2 p. and 2 x 3 p.
After 13.5 (15) 16.5 cm = 38 (42) 46 p. the height of the sleeve ridge close the remaining 20 (22) 26 p.

Assembly

Perform shoulder and side seams.

For the collar, put on circular knitting needles No. 4.5 loops along the edge of the neck of the back 38 (38) 40 p. And along the edge of the neck of the front 42 (42) 45 p. = 80 (80) 85 p. Knit alternately 2 front, 3 wrong. After 23 cm = 62 p. close the hinges according to the figure. Unscrew the collar on the front side.

Sew sleeves, sew in sleeves.