How to knit a hat with knitting needles for a woman - new

If you like to create beautiful fashionable things with your own hands, then our article with a detailed description and schemes on how to knit a hat with knitting needles for a woman is especially for you.
Honestly, today every woman must be able to knit, because there is nothing nicer than the opportunity to pamper yourself and loved ones with budget new clothes.

How to knit a warm hat with knitting needles for women?

If you are still a beginner, you can start with our first lesson on how to knit a simple hat with knitting needles for a woman. As a visual aid, you can use the videos we have selected, how to knit a hat with knitting needles for a woman.

How to tie a simple hat from a maher

Knitting a beautiful hat is not as difficult as it seems. To do this, it is necessary to arm with knitting needles, yarn and patience.

It is necessary:

• 125 g mohair
• knitting needles 4,5 mm

PP (patent loop) = insert the right knitting needle into the next loop one row below (to clear the loop of the current row).

Description:

Dial 75 loops and knit with an elastic band as follows:
1st row (BOS): 2 persons, * 1 life, 1 person; repeat from * to the last loop, 1 person.
2nd row (IP): 1 person, * 1 life, 1 person; repeat from * to the end of the row.
Tie another 8 rows with an elastic band, finish in the wrong row.

Next, continue with the patent gum:

1st row (PM): 1 person, * PP, 1 person; repeat from * to the end of the row.
2nd row (IS): 2 persons, * PP, 1 persons; repeat from * to the end of the row.
Repeat 2 rows of the pattern, until the height of the cap is 26 cm from the set of loops, finish in the wrong row.

Top formation:
1st row (BOS): 1 person, * PP, 3 life together; repeat from * to the last 2 loops, PP, 1 person = 39 loops.
2nd row (IP): 1 person, * 1 life, 1 person; repeat from * to the end of the row.
3rd row (BOS): * 2 faces together; repeat from * to the last loop, 1 person = 20 loops.
4th row (IS): 1 life, [2 life together] 9 times, 1 (0) out = 11 loops.

Beautiful winter hat from Angora

It is necessary:

• 120 g Angora
• circular knitting needles 5 mm
• loop marker
• set of double-pointed knitting needles 5 mm
• knitting needle

Shawl binding: facial loops in each row.

Openwork pattern (the number of loops is a multiple of 7).
1 circle: front loops.
2 circle: * 1 persons., 2 persons. together, double crochet, 1 person., double crochet, 1 st., remove, 1 person. and stretch it through the shot p .; repeat from * to the end of the circle.
3 circle: front loops.
4 circle: * 2 persons. together, double crochet, 3 persons., double crochet, 1 st. and stretch it through the shot p .; repeat from * to the end of the circle.
Repeat 1-4 circle. a number of patterns.

Description:
On circular knitting needles, dial 84 loops. Do not join in a circle, knit in straight and reverse rows with a 2.5 cm garter stitch. Place the marker at the beginning of the row and connect in a circle. Repeat 1-4 lap.rows of openwork pattern 6 times.

Top formation:
Switch to double-edged knitting needles when the number of loops decreases.
1 circle: * 10 persons., 2 persons. together; repeat from * to the end of the circle = 77 p.
2, 4 and 6 circle: front loops.
3 circle: * 9 persons., 2 persons. together; repeat from * to the end of the circle = 70 p.
5 circle: * 8 persons., 2 persons. together; repeat from * to the end of the circle = 63 p.
7 circle: * 7 persons., 2 persons. together; repeat from * to the end of the circle = 56 p.
8 circle: * 6 persons., 2 persons. together; repeat from * to the end of the circle = 49 p.
9 circle: * 5 persons., 2 persons. together; repeat from * to the end of the circle = 42 p.
10 circle: * 4 persons., 2 persons. together; repeat from * to the end of the circle = 35 p.
11 circle: * 3 persons., 2 persons. together; repeat from * to the end of the circle = 28 p.
12 circle: * 2 persons., 2 persons. together; repeat from * to the end of the circle = 21 p.
13 circle: 1 persons., 2 persons. together; repeat from * to the end of the circle = 14 p.
14 circle: 2 persons. together; repeat from * to the end of the circle = 7 p.

Cut the thread, leave a long end. Pass the segment into the knitted needle, stretch through the remaining loops and tighten. Pass the thread from the set of loops into the needle and sew a garter stitch. Hide the leftover threads from the wrong side.

Warm grass hat

It is necessary:

• 100 g weed yarn
• knitting needles number 6.

Description:
Start knitting by knitting 60 knitting needles number 6. Knit with an elastic band 1x1 about 4 cm.

In order to expand the circle, every 1 stitch, add 1 stitch with a twisted double crochet. Then knit 5 cm straight, after which start reducing 1 loop in each front row every 5 loops. Collect the remaining loops (there will be about 10) with a needle on a double folded thread, then fasten it.

The cap must be sewn with a knitted seam.
(On YouTube, you can watch a video on how to knit a simple hat with knitting needles.)

How to tie a fashionable hat

After you have learned how to knit simple hats, you can move on to more complex models. In 2024, the following models will be relevant: a volume hat, an earflap hat, a beanie (also called a stocking cap, a toe cap, a cap), a turban, a hood (or a hat cap), a model with a visor, a cap with a pompom, double hat, mischievous with ears, normal with a lapel, hat snood (or hat-hood).

Fashionable bulk yarn hat

The size is universal 53-54 cm.

It is necessary:

• thick yarn 200 g
• circular knitting needles 10 mm long 40 cm
• loop marker
• thick knit needle

Description:

Dial 32 loops. Place the marker at the beginning of the row and connect in a circle.
Knit with an elastic band as follows: * 2 persons, 2 out; repeat from * to the end.
Perform another 14 circular rows and evenly reduce 2 loops, knitting 2 persons together in the last circle of the rzinki = 30 loops.
Next, knit 12 circular rows only with facial loops.

Track. circle: knit 2 facial together = 15 loops.
Perform 2 more circles with facial loops. Cut the thread, leaving a long tail. Pass a piece into a knitted needle. Remove all loops on the thread. Pull and fasten the thread on the wrong side.

Universal hat with ear flaps for women

Size - 54 cm (head volume)

It is necessary:

• 250 g of yarn
• knitting needles 4 mm
  The hat can be knitted in 2 threads.

Ears:
Collect 6 loops and start knitting the cap with a garter stitch. At the same time add on both edges 6 times every 2 rows in 1 loop. Then knit directly another 14 rows.

If you add more loops, then your ear will be much wider. If you tie more rows, then similarly your ear will be longer than in the photo. So, you have tied 2 identical ears.

HAT WITH EAR FLAPS:

Now we collect everything in one product. To do this, on a long knit, take turns in loops from your ears and new ones for the front and back of the cap. Please note that at first the back of the cap will gradually increase and, as a result, will consist of two parts connected by a mattress seam. For a visual presentation, look at the photo patterns.

Thus, it is necessary to add 1 loop, knit with the front viscous (or any other, if you do not want the option from the photo) loops of one eye, dial an additional 20 loops for the front of the hat, knit the second eye and dial an additional 1 loop.

Continue knitting hats with your pattern or facial smoothness, as suggested in the photo. At the same time, add loops to expand the back of the product in every second row on both sides of the knitted fabric 1 time in 2 loops and 1 time in 3 loops. This will be about 8 rows. This will be the full width of your cap.If necessary, you can adjust it by adding more loops during the knitting process.

You need to knit about 16 more rows, which will be the height of the cap before narrowing at the crown.

Decrease in this way: 1 chrome loop *, 5 faces-loops, 2 loops with tilt to the right, 2 front loops, 2 loops with tilt to the left, 5 faces-loops *, repeat from * to *, 1 chrome th loop.
Reduce the loops in a similar way 3 more times every 2 rows, and pull the remaining loops after 2 rows. Sew the cap on the back with a mattress seam.

For the front part of the lapel, draw 20 loops around the edge and knit a garter stitch to the desired height. then close all the loops and attach the lapel in any acceptable way.

For braids, it is necessary to cut 18 threads 1 meter long, which are folded in half and threaded to the bottom of the ears and braided into braids.

Knitted beanie hat (stocking hat, sock hat, cap)

It is necessary:

• circular knitting needles 4 mm
• 200 g of medium thickness yarn
• tape measure

Description:

First of all, using a centimeter tape, measure the circumference of the head on which you plan to knit a hat. Let's say you got 56 cm. This means that you will knit a hat of the 56th size.

The second crucial step is to determine the density of knitting. What does knitting density mean? This is the number of loops and rows needed to knit a canvas measuring 10x10 cm. What it means in translation into “simple language” is to correctly calculate how many loops you need to dial at the beginning of work.
Dial 22 loops and knit 10 cm in the pattern selected for the cap.

Iron the bound sample with an iron through a damp cloth. No need to smooth it out much. Do this carefully, slightly “steaming” the sample.
Measure the prepared sample around the perimeter. Let's say you have a 10x10 cm sample when knitting 30 rows. This means that the knitting density of this pattern will be 2 loops in 1 cm and 3 rows in 1 cm.

That is, for a hat of the 56th size you need to dial: 56x2 = 112 loop and knit 30 cm, that is, 30x3 = 90 rows.

Dial the required number of loops on circular knitting needles. And knit in a circle, using the fishing line, the previously selected pattern 25-27 cm up. You will get a knitted fabric in the form of a pipe. After 25 cm, start reducing the loops, knitting together 2 loops in every third row, until you have 3 loops left on the spoke. When loops are knitted, knit a cloth with a garter stitch. Tear off the thread from the skein, leaving about 10 cm, and pull it through the 3 remaining loops, knitting them together and securing the end from the wrong side.

Watch the video "tie the beanie. "

Woolen turban hat for the cold season

It is necessary:

• 150 g of wool yarn
• knitting needles number 2,5 - 3

Knitting pattern: 1st row - 1 loop front, 1 loop purl. 2nd row - in front of the back loop, make a yarn, and remove the back loop, without knitting, knit the front loops with your face. The 3rd and all subsequent rows - in front of the wrong crochet stitch, remove the seamy back without knitting, and knit the front stitch and crochet of the previous row together (grab from the top).
The cap consists of two parts: the turban itself and the bottom. The height of the turban is 10-12 cm.

Description:
Type the turban height, about 24 loops, and knit a strip the length of which is equal to half the head circumference minus 2 cm.
Then divide all the loops in half. Remove the left part with a pin and temporarily do not knit, and on the right part knit 4 more rows. After that, swap both parts so that the right side goes to the left and over the left side. Next, put all the loops on one knitting needle and knit the second half of the strip.

If, when knitting the second half, two identical loops appear next to each other, then knit them together (so as not to knock down the pattern), and add one loop at the end of the row. When the desired length is tied, close the loops.

Now dial the loops along the entire length of the strip and knit 7 - 8 rows with English rubber, then 2.5 cm with a 1x1 rubber band. After that, start knitting the bottom: 2 rows with double hosiery knitting (knit the front loops, remove the seam loops, the thread remains before work).Then, knit 2 loops together over the face so that the front loop is on top of the wrong one. Knit 3-4 rows with a simple stocking viscous, then 2 rows along the face with double hosiery, the next 1-2 front rows with 2 loops together. Pull the remaining 6-8 loops. Boil the bottom through a damp cloth.

Video “knit a turban for women”

Original cap-hood (or hat-cap) for a very cold season

It is necessary:

• 400 g of yarn
• knitting needles number 3

Description:
On the knitting needles, dial 31 stitches and knit a transverse strip of any knit that you choose yourself for a 110 cm long frill so that it has a beautiful and finished look, then make corners in shortened rows.
In each row, be sure to reduce the knitted loops by 2, that is, first you need to knit 29 loops on the front side of the product, then leave 2 loops intact, wrapping around the 30th loop and turning the knitted product to the wrong side, then knitting the whole row to the end.

In the next row on the front side, also knit 27 stitches, leaving 4 stitches intact.

Wrap around the 28th loop and turn over again to the wrong side. Thus, knit the entire product.

Having stopped the under knitting of all the loops of the corner, start knitting the main part, increasing the rows, which will make it possible to change the direction of knitting. First, knit three loops on the front side, and in the next rows increase the number of loops by 2, but only knitted.

Having connected the strip with the corners, on the one hand, draw about 180 loops along the edge loops and knit the product with a garter stitch. Then in the next row every three loops, remove one loop. Repeat such reductions 2 more times. Then knit 5 cm garter stitch.

After 5 cm, for the main part of the hood, evenly add up to 90 loops and again knit another 17 cm with a garter stitch. Then select 30 loops in the center and knit only them, grabbing and knitting together - both at the beginning and at the end - 2 loops from the central part on each side. After all the central loops are connected to the side, close the remaining loops.

Cap with visor

It is necessary:

• 250-300 g of yarn
• circular knitting needle number 2,5
• silicone visor

Description:
Dial 80 loops, close in a circle and knit 4-6 rows with front stitch, i.e. facial loops.

When I connect in a circle, I leave the tail of the thread to indicate the beginning of the row. Divide the number of loops into three parts -18pet, 44pet., 18pet. On 44 loops we will untie the visor, making an increase of 10 loops every 4 loops. We make an increase so that the visor fits well and is conveniently located in your pocket.
When the pocket for the visor is tied out and decreases are made, we tie the second half of the rim.

Fold the fabric in half, throw the tail of the thread onto the face of the knitting (beginning of a row!). We knit one loop from the knitting needle, raise one and knit from the typesetting edge. We reach about the middle of the visor, insert the visor blank and continue to knit the loops to the end of the row i.e. to the tail.
The top of the rim (i.e. the front) should be several rows larger than the inside (to hide the holes from the turns).

And so on our knitting needles are 160 loops. You can start tying the tulle. Divide the loops into 8 parts (wedges), and knit a zigzag pattern. One wedge-20 loop. Rapport- * from 1 pet. knit 3 loops, 8 faces., 3 loops together (behind the back wall), 8 faces. * - repeat 7 more times. If you want a larger cap, you can add 16 loops = 176 pet. One wedge - 22 loops. Rapport - * from 1 pet. knit 3 loops, 9 faces., 3 loops together (behind the back wall), 9 faces. * repeat another 7 times.

We knit the desired height of the tulle, knitting one row-pattern "zigzag", one row exactly.

Tula is ready. We begin to make decreases. One row is a zigzag, one row is straight.
One row, we knit only 3 loops together, and from 1 loop-3 loops we do not, one row is exactly.

When 16 loops remain on the knitting needles, knit 2 loops together and pull on a thread.
The cap is ready!

(Watch the video from the best needlewomen of the network "connect the cap with a visor "on the YouTube channel).

Stylish hat with pompom

The size is universal.
It is necessary:

• 1 skein of yarn (75% acrylic, 25% wool; 136 m / 85 g) in three different colors: Oxford Gray (78046) - A, Steel Blue (78105) - B, Soft Teal (78209) - C;
• knitting needles 5.5 and 6 mm;
• auxiliary knitting needle.

Knitting density:
15 stitches and 20 rows = 10 cm with a larger surface with knitting needles.

Legend:
K8P = remove 4 loops on the auxiliary knitting needle at work, 4 persons, then 4 persons from the auxiliary knitting needle;
K8L = remove 4 loops on the auxiliary knitting needle before work, 4 persons, then 4 persons from the auxiliary knitting needle;
+1 (add 1 loop) = raise the loop from the broach and knit the front one. the wall.

Description:
On smaller knitting needles with thread A, dial 73 loops and knit 7.5 cm with an elastic band for 1 person, 1 out. Finish in the wrong row.

Go for larger knitting needles.
1st row (BOS): knit with thread In 3 persons, * + 1, 2 persons, +1, 3 persons; repeat from * to the end = 101 loops.
2nd and all wrong rows: wrong loops.
3rd row: 5 persons, * K8L, 4 persons; repeat from * to the end.
from the 4th to the 10th row: start in the wrong row and knit with the front surface (7 rows in total).
11th row (BOS): 1 persons, * K8P, 4 persons; repeat from * to the last 4 loops, 4 faces.
13th row: front loops.
15 and 17 rows: knit with thread C front loops.
from the 19th to the 27th row: knit with thread C and repeat from the 3rd to the 11th row again.
28th row (IS): purl loops.

Top formation:
1st row (PM): 1 persons, * 2 persons together, 3 persons; repeat from * to the end = 81 loops.
2nd and all wrong rows: wrong loops.
3rd row: 1 persons, * 2 persons together; repeat from * to the end = 61 loops.
5th row: 1 persons, * 2 persons together, 1 persons; repeat from * to the end = 41 loops.
7th row: 1 persons * 2 persons together; repeat from * to the end = 21 loops.

Cut the thread, leaving a long tail. Using a needle, stretch a section through the remaining loops. Pull and tighten the thread. Make a seam.

Pompon:
With thread A in 2 additions, wrap the arm about 50 times. Leave a long length. Carefully remove the skein of rug and tightly bandage. Sew a pompom to the top of the cap.

Watch the video how to knit a hat with knitting needles with a pompom:

Warm double hat for the winter

It is necessary:

• circular knitting needles;
• beloved yarn;
• soft yarn for lining;
• tape measure;
• scissors;
• hook.

In order to tie a double cap of your size, you need to know the circumference of your own head. Define it with a centimeter tape. Record the result and make a loop calculation for the set. It is true to make the calculation that the standard will help you, for which you need to tie a small square using a working thread. Count the number of loops in one centimeter of the standard.

To knit the front of the cap, multiply this number by the circumference of the head in centimeters and add 4-5 loops for stock. For the lining, take the yarn created for knitting children's things. It does not prick and does not cause irritation on the skin.

Description:
Type on the two knitting needles, folded together, the desired number of loops, pull out one of the knitting needles and proceed to knitting the elastic.

The most reliable is gum 1x1. It stretches well and retains its initial appearance for a long time. After tying 5-6cm elastic, start stocking. When knitting in a circle, the front loops are best knitted for the front thread, so they turn out more even.

Knit the main part of the cap about 15 cm high. Then start the decrease. If you decide to knit a double hat on radial knitting needles, divide the number of loops by 4, mark each part and knit 2 loops together for each part first. In this case, if knitting is done with a set of 5 knitting needles, knit 2 stitches first of each knitting needle.

After all the loops are closed, hook the thread on the seamy side of the cap.

For the lining of the cap, dial the loops on the wrong side of the main fabric, immediately after the end of the elastic. Do not forget to reduce 4-5 loops. Do knitting with the front surface. Tie the lining 1-2cm shorter than the main part of the cap and close according to the same pattern.
Wash knitted products by hand, in warm water, with special detergents for washing knitted products. It is necessary to wring them out without twisting, but to dry them on a terry towel in a straightened form.

Hat with ears

Size 56-57.

It is necessary:

• 150 g of yarn
• circular knitting needles 4 mm

Description:
For the first "ear" you need to dial 7 loops and knit in this order: 1Krom., 1IP, 1LP, 1IP, 1LP, 1IP, 1Krom.
2nd and all wrong rows - fit according to the drawing.

Next, knit with elastic band 1LP x 1IP, making additions of loops on both sides in each front row 7 times, 2 loops (at the beginning and end of the row). Insert new loops into the drawing.

As soon as there are about 21 loops on the knitting needles, measure the length of the "eye".
If the length fits, then set aside and start knitting the second.
If not, then knit directly the required length, but without adding loops.
Tie the second “ear” in the same way.

Then, on circular or stocking knitting needles (you can also knit on straight, but then the seam will go along the back of the head, and the loops will need to be distributed taking into account this seam), dial 33 loops, add 21 loops of the first “eye”, dial 33 loops again, add 21 loops of the second "eye".

Next, knit with an ordinary elastic band 1LP x 1IP about 3-4 rows. See that the gum pattern is harmoniously distributed on the newly typed loops.
Those. For the front and back of the cap, which consists of 31 loops, distribute the loops like this:

7 elastic loops, 6 elastic loops, 7 elastic loops, 6 elastic loops, 7 elastic loops = total 33 loops; for the “ears”, each of which consists of 21 loops, distribute the loops in this way: 6 loops of the harness, 1 PI, 6 loops of the harness, 1 IP, 6 loops of the harness = total 20 loops. Gently shorten 1 loop, i.e. knit 2 stitches together without ruining the pattern.

Knit directly, repeating the rapport of the “harness” according to the pattern, about 14-16 centimeters.
After starting to reduce the loops.
To do this, in each 4th row, evenly throughout the row, reduce:
3 times in 1/4 of the total number of loops

Check the height of the cap, if it fits, then pull off the remaining loops with the end of the thread and fasten them. As a rule, the height of the cap with ears can be from 20 to 22 centimeters. Maybe someone likes the taller one.
If the height is insufficient, then knit a few more rows in height, while reducing the existing loops, and close at the end.

For stitches, attach yarn to the ends of the “ears”. About half the length of the desired length of the strings themselves. Take the yarn into several threads for three parts, which then will be braided into a pigtail. This will be your tie, Tie a knot at the end and align the yarn at the bottom of the tie with scissors.
Make a pompom for the crown.

See “how to tie a hat with ears for a woman”

Winter knitted hat with a lapel

Size 56-57.

Necessary

• 150 g of yarn
• regular knitting needles number 5

Description:

The number of loops should be divided by 4, plus 2 edge loops. If we knit on an adult, it will take about 98 stitches: 96 + 2 = 98.
We collect the loops and proceed to knitting the first row: we remove the edge loop without knitting, then the 2x2 elastic: 2 front loops, 2 wrong loops, the last loop of the row (edge) we always knit the wrong one to maintain even edges of the product. The first loop of the row is always removed without knitting.

All further rows, both purl and oblique, are knitted according to the pattern: 2 oblique loops above the facial ones, 2 purl loops above the purl.
Upon reaching the required depth of the cap, taking into account the lapel option you have chosen, we begin to make reductions from the following front row: we sew the 2 wrong loops together with the wrong loop.

In the second row (wrong side) we knit according to the picture: 2 wrong loops, 1 front.
In the third row we reduce the front loops: instead of two front we knit two loops together front. It turns out a gum 1x1: 1 front loop of two front, 1 wrong.

The fourth row - according to the drawing: 1 wrong loop, 1 front.
We knit the fifth row (front) together in two loops of the front.
And the sixth, final row - all the loops are wrong.

As you can see, decreases when knitting hats from a rectangle have the same principle as when knitting in a circle, there is only an adjustment for the front and back rows.

When knitting hats from a rectangle, it is better to leave the tip of the thread longer so that it is enough for the back seam. We collect the remaining loops on it using a hook or a large needle, tighten it into a ringlet and carefully sew a hat.You can connect the edges of the cap in different ways (seams), this is an occasion for a separate article, but the main goal in any case is to make the seam look equally neat both on the front side and in that part of the inside that will be visible when the cap edge is turned away . Remember this!

That's all. Confuse, cut the excess end of the thread and go to the fitting.
I wish you interesting work and warm hats!

If you need a visual example, watch the video astie a hat with a lapel on YouTube.

Hit of the season - snood hat

It is necessary:

• 200 g of yarn
• circular knitting needles No. 5

First, determine the width and length of the future product, and then tie a small piece of the viscous one you prefer. Having chosen the fragment you like, you can calculate the number of loops for the product. So, put on the circular knitting needles of the desired number of loops. The proposed snood needs to be knitted with Polish elastic. This knitting is not very difficult, and if you knit it for the first time - do not be afraid, you adapt quickly enough.

The resulting chain of loops must be connected in a circle and knit.

First row: 3 front loops and one wrong side.

Second row: two front loops, one purl, and one front loop.

Third row: fits in the same way as the first row.

Fourth row: knit in the same way as the second.
Next, continue to knit in cycles. Do not forget that the wider the cap, the more spectacular it can be laid on the head. |

Video "howto knit a snood hat ”will help beginners learn more about the whole process of creating such a beautiful knitted creation.

How to knit a hat with a pattern

Caps with a pattern look more spectacular, but knitting them is much more difficult, since you need to monitor both the shape of the cap and the pattern. Sometimes you get lost and you have to start all over again. But if you are careful and practice on a small sample, you will succeed the first time.

English rubber hat

It is necessary:

• wool yarn - 50 g at 135 m;
• knitting needles straight No. 4 - 2 pcs.;
• crochet hook;
• scissors;
• darn needle.

1. Find out the head circumference of the future owner of the headgear and be sure to make a small square of the knitted fabric for the sample - the density of knitting is always calculated individually. When knitting hats with an English rubber band, an elastic, almost dimensionless, product is created. In the described example, with a head girth of 55-60 cm, a knit density of 18 loops in 46 rows, 78 loops are drawn for the headband. Knitting needles are used straight, medium diameter (No. 4).
You can start knitting a hat with an English elastic band without performing an elastic rim-border. At the same time, you can make the product canvas with or without a turn. Please note: 1x1 elastic band fixes the edge well!

2. Tie the bezel in straight and wrong seams, sequentially alternating 2 front and 2 purl stitches. When 8 rows are ready, start knitting a hat with English rubber. In the first row of the pattern, you will need to make uniform increases, bringing the total number of loops to 95.
To add loops, divide the row into equal segments, and in each knit with an additional thread on the bow. To do this, grab and twist the transverse threads between adjacent loops.

3. Perform a lush canvas with English rubber until you reach a height of 25 cm from the edge of the rim. To form the basic pattern of knitwear, alternate loops in the following sequence. In the first row of the pattern, do only facial ones; start the second row with an edge loop (it is removed without knitting); follow the front. Next, repeat the so-called double facial loops, introducing the right knitting needle into the filament arch of the previous row. Final loops - front and edge.

4. Begin the third row of the English gum also with the edge loop, then alternate the double and regular front loops until only a couple of thread arches remain on the left needle. Knit the first of them double front, the second will be edge.Repeat the pattern according to the finished pattern of the second and third rows, until you make the main canvas of the headgear of the desired size.

5. Proceed with the formation of the crown of the cap. To round the knitted fabric and tighten it on top, make uniform reductions in the loops in the straight and reverse rows: at the beginning, the edge loop; for a series of 3, the filament arches are knitted together with the usual front; at the end - edge. In the next row, make reductions without leaving hem, always knit 3 loops together.

6. Cut the work yarn, leaving a “tail” of about 10 cm long. Pull open loops of the last row with it and drag it inside the cap. Form a sturdy knot.

7. Unscrew the cap from the wrong side down, unfasten the knitted fabric and carefully connect the side edges of the part. Make a neat connecting seam with a darn needle and thread from the work clew. To ensure that the stitch remains sufficiently elastic, and the product does not deform, do not make the stitches too tight.

Watch the video “how to tie a hat with an English rubber band”

Stylish hat with braids

It is necessary:

• 150 g of yarn
• knitting needles number 3,5,
• knitting needles number 4, 5

I knitted on two knitting needles, because on circular knitting a large thread I get strongly in tightness and large holes between the loops, but I like it more tightly. Then I sewed it.
I scored 96 loops. Spokes number 3.5. Knitted in 2 threads, yarn with wool 20%, 135g at 50m.

Tied an elastic band 2 × 2 about 6 cm.
I switched to knitting needles No. 4.5

Pattern:

• (2 out, 6 persons, 2 out, 2 persons) - repeat to the end of the row.
• knit according to the drawing, where it is out-of-life, where there are persons - persons.

Knit 6 rows in this way and in the 7th row do overlaps where there are 6 faces. (YouTube has a full video on how to knit braids). I did this: I transfer 3 loops to a toothpick, knit the next 3 with the front ones, return these 3 loops from the toothpick to the left knitting needle and knit them too. So to the end of the row.

After these overlaps, we knit 1 row on the wrong side according to the drawing, I do not count it.

And repeat again all 6 rows, in the 7th overlap
And again repeat all 6 rows and in the 7th overlap
In total, 3 braids were made. And from the beginning of knitting, about 15-17 cm were tied.

Then knit in the same way, but make decreases. How to make decreases, I won’t write, because in three hats I did different things all the time, I still didn’t understand how to do it better. The most important thing is that they are invisible.

After watching the video “how to knit a hat with braids with knitting needles for a woman” in addition, you can easily master the science of knitting.