Gloves are a beautiful and useful thing. They can not only warm, but also decorate, make the image more refined, calm, or vice versa - bright, catchy. A particularly wide variety of models for all seasons and occasions offer crocheted gloves that create a worthy competition for models created with knitting needles.
It is due to this method of execution that gloves can turn out to be both dense and textured, as well as finest, delicate. Of course, the deciding factor will be the yarn you choose - it is she who is responsible for the heat, thickness and degree of openwork of the product. Such a variety of knitting possibilities allows you to get equally beautiful gloves for women and girls, comfortable and practical gloves for children, and warm gloves for men.
Crochet gloves - diagram and description
Let us consider in more detail the most common crochet gloves, including the way to knit products for beginner needlewomen. We also learn how to crochet mitts - fingerless gloves, and we will analyze in detail how to knit men's, women's and children's gloves.
Knitting for beginner needlewomen
Crocheting gloves provides the ability to create quite thin, but dense and warm products. Let's try to create one of these, while performing a simple uniform pattern.
Crocheting gloves for beginners begins with definitions hand measurements. You can do this as follows: circle the palm of your hand with a pencil or pen on a piece of paper. Now, in accordance with the scheme, we measure the following indicators:
A - the width of the palm at the base of the fingers (the approximate width of our glove); B - the distance from the base of the palm to the bend of the thumb; C - the distance from the base of the palm to the tip of the middle finger (the length of the glove without the cuff); D - distance from the base of the palm to the base of the little finger.
Materials for work:
- jersey;
- hook number 2.5.
Working process
We collect a chain of air loops equal to the length of the circumference of the wrist + 1 cm for free dressing of the glove. We connect the chain into a ring with a connecting column and to start knitting the first row we make 3 lifting air loops.
First row we knit art. s / n and end the row with a connecting loop in the last lifting loop. Next for knitting second row make 2 lifting air loops and knit a gum pattern, alternating convex and concave relief columns. End the row also with a connecting loop. Next rows knit gum as well as the second. Cuff gloves patterned elastic at your discretion can be any width from 4 to 6 cm.
Then go to knitting body glove. We knit the glove with half-columns in circular rows in a spiral, that is, we do not make lifting loops, then the seam of the initial loops of the row will not be visible.
For yourself, outline the sides of the glove where the thumb will be located, and where is the little finger.
Having connected 2-3 circular rows with half columns along the side at the side of the thumb, we begin to make additions to expand the wedge of the thumb. To do this, in the next 5-7 rows, add one half-column, knitting two out of one loop.
When the knitting reaches the base of the thumb in the last row in height, without having tied 6-7 stitches to the edge, we draw a chain of 8-9 stitches and fasten it into the arch through 12-14 stitches of the previous row. Thus, a hole for the thumb is obtained, which fits last.
Next, knit in circular rows the main part of the glove until the beginning of the little finger. Do not break the main working thread, but tying it to the side of the thumb, pull out the large loop so that the knitting does not open.
Before you start tying the fingers of the glove, calculate the loops for each finger. You can identify them by trying on a glove and noticing loops on the inside and outside. To knit the little finger, attach the thread from the palm, make 3-4 air loops and attach the arch to the back of the glove. Next, knit in a circle half-columns to the height of the little finger.
Closer to the tip, decrease on both sides of the finger to narrow. When the finger is tied to full height, close the loops, knitting in a circle the single crochet posts - one of two loops. When the hole narrows, cut the thread, fasten it by stretching the tip through the loop. Insert a needle into the remaining tip of the thread and darn the remaining hole, thread the thread on the wrong side.
If you look at your hand, you will see that the fingers are located at different heights of the first little finger, just above the index finger, and the middle and ring fingers are at the same level. Therefore, after knitting the little finger, return to knitting the main part of the glove. Having taken the left thread into work, tie one circular row with half columns along the inside, the arch at the base of the little finger and the outside of the glove. Now you can knit your ring finger. Attach a new thread to the inside, tie a chain of 4 air. eyelets and secure the arch on the outside (photo 1).
Knit half-columns to the height of a finger, narrow it in the upper part, making reductions on the sides. Finish knitting just like on the little finger - do the reduction, knitting together two single crochet columns until the hole narrows to a small hole.
Again, take the left thread of the main part into work and knit one circular row through the arch of the ring finger. Next, attach the thread for knitting the middle finger. If a large hole for the finger is obtained at the base, then make reductions in the corners, knitting two half-columns together (photo 2).
Knit the index finger with the left thread from the main part of the glove. Attach the thread for knitting the thumb and knit in a circular half-columns, first decreasing in the corners, knitting two half-columns together until the hole is equal to the diameter of the finger. Next, knit it to a height and narrow it in single crochet columns.
The glove for the other hand also fits, but in a mirror image. The back can be decorated with a knitted flower or embroidery.
Fingerless model
Very popular fingerless gloves these days, also called mitts, allow you to drive and use the phone quickly and without discomfort. In addition, the knitting process of this model is much simpler than knitting simple gloves - after all, there is no need to work with each finger individually.There are many varieties of mitts, since they are knitted for both the summer season and the winter. Let us consider in more detail how to crochet gloves without fingers, which look very impressive in the autumn and winter.
Materials for work:
- yarn “ADELIA Jessica” (67% wool, 33% polyester, 260 m / 100 g);
- hook number 3.
Working process
First you need to dial a chain of air loops of such a length so that four fingers easily pass into it, folded in half. We will knit the mitt from top to bottom - from the fingers to the wrist.We close the chain into a ring using a connecting column, knit two lifting air loops and then three rows of single crochet columns (photo 1).
Next, we go on knitting with lush columns. A fluffy column is three or more “under-knit” crochet columns knitted at the end in one loop. In this case, the lush columns consist of exactly three “incomplete” double crochet columns. To make a magnificent column, we make a crochet, introduce a hook into the loop of the previous row and pull the thread. We knit the thread into the resulting loop and the crochet (photo 2).
There are two loops on the hook. Again, we will double-crochet and again “incompatible” a simple double crochet (photo 1). There are three loops on the hook (photo 2). We repeat again - four loops appeared on the hook (photo 3). Finally, we knit all four loops at the same time (photo 4). The magnificent column is ready!
We knit three rows of lush columns, then three rows of crochets, then two more rows of lush columns. In principle, the alternation of different knits can be anything - it all depends on the taste and desire of the knitter.
We walked to the base of the thumb. We knit a chain of fifteen air loops and attach it with a connecting column to the main knitting through four loops from the beginning of the chain. Let’s try a mitt - the thumb should pass freely into the hole intended for it. If the hole is smaller or larger than you need, change the length of the chain (photo 1).
We continue knitting in a circle with single crochet - only the row has become longer by fifteen (in this case) loops. It is more convenient to knit in a spiral, without lifting loops (photo 2).
Having knitted two rows with single crochet, we begin to make reductions. It is best to do them this way: evenly knit four loops in a row - knit the next row without decreases - knit four loops again - knit a row again without decreases. There were four rows with decreasing numbers. Having finished the decrease, we will knit another four or five rows without decreases. We finish knitting with five rows of embossed columns.
There are details left: the upper part, as well as the hole for the thumb, can be framed next to “pico”, knitting previously two or three rows of single crochet posts. We knit the second mitt in the same way as the first. A pair of fingerless gloves is ready!
Master class - how to tie men's gloves
As a good gift to a dear person, you can crochet men's gloves. This does not take much time and effort, especially if you work according to the master class in crocheting gloves. In this case, we will talk about beautiful gloves that will look great in monophonic, moderate colors, preferably black, gray, dark blue.
To begin with, you should also outline the contour of the male hand on paper, or measure his old gloves.
Materials for work:
- thin acrylic or wool mixture yarn;
- hook No. 2-2.5.
Gloves are knitted in the transverse direction from the little finger to the thumb. One glove consists of two parts: the back - with four fingers connected and the inside with the fifth thumb tied out. We sew the finished halves of the glove, in conclusion, at the bottom, tie the cuff with an elastic band from embossed columns.
Working process
Type the initial chain of air loops from the beginning of the cuff to the tip of the little finger along the pattern. Next, knit the rows with single crochet on the width of the little finger. Each new row of posts starts with one lift air loop.
When knitting b / n columns towards the fingers, tie to the base of the ring finger and draw a chain of air loops up to the tip of the ring finger.
Next, knit the rows of Art. b / n to the width of the ring finger. Also extrude the middle and forefinger. The back of the glove ends after tying the index finger.
The inner half of the glove fits just like the back to the middle finger.At the beginning of knitting the index finger, in a row of columns in the direction from the cuff to the fingers, tying the columns to the base of the thumb, dial a chain of air loops equal to double the length of the thumb. Lock the chain in a long loop, continuing to knit the columns in a row to the base of the index finger, then dial a chain of air loops to the length of the index finger.
Tie several rows of single crochet columns, first along the chain of the index finger, along the row of the brush to the loop of the thumb, then along the chain of the thumb and then to the cuff. Turning the work, knit the columns in the opposite direction until you tie the strips to the width of the index and thumb.
Fold the two halves of the glove, the back and the inside together. You can connect them by crocheting a row of connecting posts along the contour, or simply stitch them with a needle, also sew the sides of the thumb. Turn the stitched glove to the other side so that the seam is inside.
On the bottom of the glove, first knit a row of double crochet, then two rows of embossed columns, alternating between convex and concave. Knit the second glove in the same way, only when stitching, place the parts so that the thumb is on the other side.
How to knit fishnet gloves for a woman
Filling up your wardrobe with gloves is always a great idea, because it is they who warm your hands and give completeness to the female look in the cold season. Even needlewomen without great experience can do this with their own hands, you just need to pick up a detailed knitting scheme with a description. Let's look at how to create crocheted delicate gloves with step-by-step photographs.
Make measurements
Using the method of measuring hands indicated at the beginning of the article, we determine the size of future gloves. Now you need to calculate the required number of loops. Usually, in the descriptions of knitting gloves, they mention how many loops are contained in the sample 10 * 10 cm. However, it can be simpler: tie a small sample (10-15 loops, 4-5 rows) and find out how many elements are in whole centimeters.
In this case, 1 cm is 3 double crochet, that is, initially 3 air loops. The width of the glove is 8 cm, which means 8 * 3 = 24 (1 more loop is added for the symmetry of the pattern = 25).
Knitting pattern
Working process
We begin to knit the upper part of the glove of the right hand. We collect a chain of 25 air loops + 3 air loops to go to the next row. We knit 2 rows with columns with one crochet in each loop (photo 1).
In the third row we knit 6 crochet stitches, then we begin to knit a pattern: we skip one loop, in the next we knit a “fan” of 6 crochet stitches, skip one, two crochet stitches. Repeat the pattern element 2 more times and end the row with double crochet (photo 2).
We knit another row with a pattern element in the middle. Then 2 rows with single crochet. At this stage, the length of the part should be equal to the distance from the base of the palm to the base of the little finger (d).
In the next row, leave space for the thumb. We knit 2 double crochet stitches, skip 8 stitches (or try on as many as you like), knit a chain of the same number of stitches over them and continue to knit double crochet stitches. In the next row, in each loop of the chain we knit 1 single crochet.
How to knit children's gloves
Another interesting model of knitted gloves is thin fishnet. They are suitable for girls. so for girls. Beautiful, light, delicate - they are perfect for a beautiful outfit for a matinee, graduation or any other celebration. A detailed master class will help you learn how to crochet children's gloves.
Materials for work:
- cotton threads No. 30-40;
- hook number 1.
Working process
We start knitting gloves with fingers. To do this, we knit 8 st b / n in the initial ring, tighten the ring, make the connecting loop in the first column and begin to knit with arches from 3 air. loops in a circle cylinders tying the index and middle fingers, try on knitted cylinders and make additions of arches to the base of the finger.
Connect the finished cylinders to the index and middle fingers, and tie around 1-2 rows of the main pattern.
Attach the next cylinder to the ring finger, also attach to the side of the middle finger and tie 3 cylinders around it now.
Then it’s the turn of the little finger, attaching the little finger’s cylinder, tie the main pattern around the palm of your hand, do not forget to try on the glove while tying, and if necessary, reduce the arches between the fingers on the inside of the palm.
Having tied the glove to the thumb, attach the connected cylinder and continue tying, making one arch in each row on the inside of the palm from the point of attachment.
Having tied to the end of the palm of your hand, stop making decreases and knit in a circle to the required length of the glove, then tie the edge with a beautiful border according to this pattern:
Video lesson
A video master class will help you get used to the technique of crocheting gloves faster for beginner needlewomen. This will save time and save beginners from possible mistakes. The video shows the option of knitting mitten mittens - another interesting way to combine gloves, mitts and mittens.
Video lesson - how to crochet gloves
