Knitting mittens for beginners step by step

Mittens have always been the most practical and comfortable for a cold winter. Today in stores a huge selection of mittens for the whole family, but it is much more pleasant to wear things that were created with love with your own hands.

Learning how to knit, you can create whole sets: hat, scarf, mittens. They will be beautifully in harmony with each other if they are performed in the same style with the same pattern.

I propose moving directly to discussing the topic: "how to knit mittens with knitting needles - step by step instructions."

How to knit mittens with needles (for beginners step by step)

In order to learn how to knit beautiful stylish mittens, you need to learn how to knit the simplest ones, based on which you can create the most original patterns for the whole family.

Seamless mittens - master class with a detailed description (photo)

The most interesting thing is that even the lazy will cope with this model. They may be solid, but the author suggests adding a few red stripes for a change.

For work, we need a woolen thread (70 g), 5 stocking knitting needles No. 3.

The author has a knitting density =1,7 loops of 1 cm. Next, you need to measure the girth of the brush, but we will knit for a hand whose girth of the brush is 20 cm.

The product is knitted from top to bottom on five knitting needles, as a result of which it will turn out seamlessly. Loop calculation:20 x 1,7 = 34 loops. We distribute 34 loops on 4 knitting needles. I propose to round and dial 36 loops, so we get 9 each.

To facilitate the explanation, we give each spoke a serial number. Closing the circle, we knit four stitches of the 1st knitting needle together with the end of the yarn remaining on the 4th knitting needle from the set of loops so that the circle closes around the edge more tightly.

Start with right part. We will assume that on the 1st and 2nd knitting needles there are loops of the lower part of the mittens, and on the 3rd and 4th - the upper ones. We start the work with an elastic band that we knit 1 × 1 (1 front, 1 wrong side). The height of the elastic or cuff is 7 cm.

Next, we proceed to knitting the main part of the mittens: we knit in a circle with facial loops to the base of the thumb 5 - 7 cm, depending on size.

The thumb will be knitted on the 1st knitting needle, for the left - on the 2nd. To do this, we knit the first loop with the first color of thread in the first needle. All other loops, except the last one, are knitted with colored thread. Then we return the loops connected by a colored thread to the 1st knitting needle and once again we knit the main thread. We get a colored stroke. This will be the hole for the thumb in the future. Next, just knit to the little finger (about 8 cm).

Then proceed to decrease loops on the toe of the mittens. On the 1st and 3rd knitting needles at the beginning, we knit the first two loops together in the front in the second way (behind the back walls), after first turning the 1st loop. On the 2nd and 4th knitting needles we knit two loops together at the end of the knitting needle face first way (for the front walls). So, we decrease the loops through the circle until half the number of loops appears on each spoke (in our case, when the number of loops on each spoke is odd, we reduce the smaller part - 4 loops through the circle), then we reduce the loops in each circle (5 loops). At the same time, on the 1st and 3rd knitting needles, in those rows where the loops do not decrease the first loops, we also invert and knit in the first way. When there are 2 loops on each spoke, we tighten the loops and fix on the wrong side.

Now proceed to tying the thumb. To do this, carefully pull the colored thread out of the thumb hole. Then we introduce two knitting needles into the loops, we get 7 loops on the lower needle, on the top 6. We start knitting a finger, distributing the loops into 4 knitting needles: on the first 4 loops, on the second 3 and pull one loop from the side edge of the hole, on the 3rd and the 4th spoke will also have 4 loops (3 + 1 from the side edge of the hole). To make it more convenient, the end of the working thread can be lowered into the hole (on the wrong side of the product).

We continue to knit the finger in a circle to the middle of the nail, and then we begin to lower the loops in the same way as when knitting the toe of the mittens: on the 1st and 3rd knitting needles at the beginning, on the 2nd and 4th knitting needles at the end, but decreasing do in each row. When the first loop remains on each spoke, we tighten the loops and fix them on the wrong side.

Left mitt It fits in the same way as the right one, but in a mirror image: we knit the hole for the finger on the second needle.

Step-by-step instruction for knitting on two knitting needles

Such long mittens also fit on two knitting needles. You can separately connect the two parts with the subsequent connection of the halves, but we will consider the option where you have to make just one inconspicuous seam (it will be correct and visually more beautiful).

Necessary: ​​yarn, knitting needles, pin ordinary and for knitting, centimeter tape, hook, needle.

Let's start with the right part.

We measure the girth of the wrist, the length of the palm and thumb. It is also necessary to measure the density of knitting by knitting a little. We measure how many loops are in 1 cm. I have a girth of 20 cm, in 1 cm - 2 loops. Need 40p-4 = a set of 36p + 2 edging.

We start from the bottom with a 2x2 elastic band (2 front, 2 wrong). It turned out about 10 cm (15 rows).

Next, go to the main canvas, where you can choose a smaller diameter knitting needle. In the second row, add 4 loops evenly. Next, we simply knit 7 rows to the base of the thumb. You can try on and, if necessary, tie more \ less.

The finger in the mittens is not on the side, but no matter how much closer to the palm, so we knit for the right mitt as follows.

• A. - edge, 2p. we knit according to the drawing and remove it with an ordinary, sewing pin.
• B. - For the finger, 6-7 loops are taken. Depending on the completeness. We knit 7 loops according to the drawing, and remove all the remaining ones with a pin.
• V. - on the working needle we only have 7 loops of the thumb.

We knit in height the main pattern, without hem !!! We multiply the length of the finger by 2. I have a finger of 6cm * 2 = 12cm in height. 21 rows came out. FIRST AND LAST KNIFE BY FIGURE !!! We return to the knitting needle of a loop with a large pin.

We knit to the end of the row according to the drawing. Next, we knit the desired number according to the drawing. See the place where the little finger ends. I have 16 front rows. We try on and check the size.

Divide all the loops by 2. One part is removed with a pin.

We begin to reduce.

Edge, 1p. according to the drawing, 2p. together, further in the figure, when 4p remains on the spoke. we knit 2 together, 1 according to the drawing and the last one, as the edge seam.

The back row is knitted according to the figure. I do not have a 20-spoke needle. I knit so, hem, 1 front, 2 together, 12 front, 2 together, 1 front, 1 inside. Total 20 loops. So cut in each front row until 6-8 stitches remain on the spoke. I have 7.

We close the loops and do the same procedure with the second half. In order to finish correctly, just knit two loops together, shifting the knitted to the main knitting needle.

Next, we do the final work. Sew a finger and the mittens themselves.

From these lessons, it can be concluded that knitting is not so difficult. Knitting mittens requires basic knowledge and a bit of free time.

Mittens with knitting needles with a pattern (diagrams and description)

Learning to knit the simplest models, you can dilute them with beautiful patterns, giving free rein to imagination. In the article "Knitting patterns and patterns (description)»You will find them in large numbers.

And now I propose to switch to more complex mittens with knitting needles (diagrams and description will help you understand this difficult matter).

How to tie beautiful mittens with braids for women

Mittens with braids knitting scheme and description for lovers of the classics.

The pigtail will be the main decoration. We chose a simple braid, but if you are not afraid of difficulties, you can choose a more complex and original option.

Yarn - acrylic (can be from angora), about 70 g .; knitting needles number 3,5.

Gum pattern: 2 persons., 2 out.

Knitting pattern "braids": Cross the 8 stitches to the left (leave 4 stitches on the auxiliary knitting needle before work, 4 persons. And knit stitches from the auxiliary knitting needle).

Cross 8 loops to the right (leave 4 loops on the auxiliary knitting needle at work, 4 persons. And knit the loops from the auxiliary knitting needle).

To dial 48 p. And distribute them on the knitting needles, it turns out 12 loops on each spoke. Knit with a pattern elastic 3.5 cm (if you do not have enough elastic, knit more cm).

Then, proceed to knitting the main pattern. For the convenience of knitting a “braid” pattern, I transfer the stitches from the 1st and 2nd knitting needles to one knitting needle. Those. the loops are distributed on 3 knitting needles (not 4 knitting needles), on the first knitting needle there are 24 loops of the main pattern, and on the 2nd and 3rd knitting needles, 12 loops on the palm side.

So, the first row after the elastic starts with a knitting needle on which 24 loops, we begin to knit the main pattern.

1-6 row: 1 persons., 2 out., 8 persons., 2 out., 8 persons., 2 out., 1 persons., 2-spoke stitches from the palm of the hand knit faces.

7th row: 1 person., 2 out., 8 stitches cross left, 2 out., 8 stitches cross right, 2 out., 1 person., Stitches on 2 knitting needles from the palm of the hand. Repeat rows 1-7 throughout the work.

At a height of 10 cm from the beginning of knitting (you do not have to have 10 cm, your hands and fingers are different), we form a hole for the thumb. Let's start with the left mittens. On the knitting needle from the palm of the hand (3rd knitting needle) we knit 4 persons., 6 p., We remove it with a pin, we draw 6 p. On the knitting needle (so that there are 12 left as before), 2 persons.

We knit the hole for the thumb of the right mitt symmetrically, i.e. on the second spoke from the palm: 2 persons., 6 p., remove the pin, we put on the knitting needle 6 p., 4 persons.

Toe formation we carry out after the little finger on the hand is closed.

For a rounded toe, knit on each spoke two middle loops together of the faces.

Reduce the stitches in each row until only 1 st. On the knitting needles (total 4). After that, tear the thread of the ball and put it into the needle. Pick up all 4 p. With a needle, pull and secure the mittens from the inside.

After the two mittens are connected, we proceed to knitting the thumb. To do this, we remove 6 pitches from the pin on the knitting needle, we collect 6 p. On a parallel row and we collect 4 p. On two side rows. A total of 20 p., We distribute them into 4 knitting needles (5 p. Per knitting needle).

And we knit circular rows of faces. to the required finger length. We form the toe of the finger similarly to the formation of the toe of the mittens.

Done!

Knitting mittens for children

Children are very fond of when mom creates, for example, beautiful foxes or bears that you can put on their hands and go play snowballs.

Knitted baby mittens with owls

For a child there is nothing more interesting than a mitten with a picture. He wears such things with great pleasure, therefore I propose to please the child with wondrous owls.

Materials and tools:

1 skein;
stocking knitting needles No. 1,5;
additional knitting needle or special loops;
needle for yarn;
four beads;
thread and needle for sewing beads.
Mittens are knitted in two threads.

So, we collect 32 loops, distribute them into 4 knitting needles (8 on each).
1 - 10 rows: gum of 1 person. x 1 out.
11 row: persons.
12 row: persons .; add 2 persons from broaches. on each spoke
13-18 rows: persons.
19 row: we begin to knit an “owl” on 12 loops of the third and fourth knitting needles. The first spoke - persons .; the second spoke - persons .; third knitting needle - 4 persons., 6 out; the fourth knitting needle - 6 out., 4 persons.
20 row: same as the 19th.

21 row: the first knitting needle - persons .; the second knitting needle - 2 persons., remove 6 loops for a hole in the thumb on a pin, dial 6 additional loops, 2 persons; the third knitting needle - 4 persons., 2 out., 4 persons .; the fourth spoke - 4 persons., 2 out., 4 persons.

22, 23 rows: the first knitting needle - persons .; the second spoke - persons .; the third knitting needle - 4 persons., 2 out., 4 persons .; the fourth spoke - 4 persons., 2 out., 4 persons.

24 row: the first knitting needle - persons .; the second spoke - persons .; the third knitting needle - 4 persons., 2 out., 2 loops to remove for extra. knitting needle at work, knit the next two stitches of faces., then stitches on extra. spoke - persons .; the fourth knitting needle - remove two loops on extra. knitting needle before work, knit the following two persons., then loops on extra. spoke - persons., 2 out., 4 persons.

25 - 31 rows: the first knitting needle - persons., The second knitting needle - persons., The third knitting needle - 4 persons., 2 out., 4 persons .; the fourth spoke - 4 persons., 2 out., 4 persons.
32 row: same as the 24th

33 - 35 rows: the first knitting needle - persons .; the second spoke - persons .; the third knitting needle - 4 persons., 2 out., 4 persons .; the fourth spoke - 4 persons., 2 out., 4 persons.

36 row: the same as the 24th and 32nd.

37 row: the first knitting needle - persons .; the second spoke - persons .; the third spoke - 4 persons., 2 out., 2 persons., 2 out .; the fourth knitting needle - 2 out., 2 persons., 2 out., 4 persons.

38 - 41 rows: the first knitting needle - persons .; the second spoke - persons .; third knitting needle - 4 persons., 6 out; the fourth knitting needle - 6 out., 4 persons.

39 row: we begin to reduce. The first knitting needle is to knit the first 2 stitches together of the faces. behind the back wall; the second knitting needle is to knit the last 2 loops of faces. behind the front wall; the third knitting needle is to knit the first 2 stitches together of the faces. behind the back wall; the fourth knitting needle is to knit the last 2 loops of faces. behind the front wall. The rest of the stitches knit according to the pattern (faces. And p.)

When there are only 8 loops left on the knitting needles, we pull them together with a needle. For the thumb, we transfer the 6 loops taken on the pin to the knitting needle, we draw 2 + 6 + 2 loops from the edges to the three needles.

Ideas with bullfinches (embroidery)

Having simple mittens on hand, you can decorate them with original embroidery, which will look great in a children's outfit.

Video lessons from the best masters

YouTube today has become a real treasure, where you can find a huge number of instructional videos. For example, in the blogs of Svetlana Bersanova, you can watch a video lesson for free. And such good authors are not few. You can find a mentor to your liking and receive valuable knowledge absolutely free.

Original mice or white hedgehogs for babies

How to knit mitts

Warm fishnet for a girl (double of mohair)

Part 1

Part 2

Interesting two-color minions for a boy of 7-8 years old

Jacquard products (video tutorials)

Winter-themed Jacquard is a classic that will always be relevant, so I suggest moving on to the most difficult options that require maximum time and attention to detail.

Original knitting with an ornament (Norwegian patterns)

For girls with deer

If you want to learn how to knit a complex, but very original “deer” pattern, this lesson with a detailed description will help you.

Men's mittens with arana for little men

If you learn all the lessons we have proposed, you can fantasize and create products of any complexity: women's gloves without fingers, with a convertible top, with a false pattern, from thick yarn and embroidery. Good luck with your endeavors. Try, experiment and pamper your home with nice knitwear.